RamsetPower Tools battery Article&FAQ
Understanding your Ramset Battery needs
- We strive to make you power tool battery purchases easy. Since we understand that finding the right batteries for your needs can be overwhelming and confusing at times we developed a power tool battery finder tool to help find the right size for the make and model of your equipment. We also offer educational articles and tips to help you conserve your batteries and understand common problems. By us providing education you are able to make the right purchasing decisions as well as provide proper care for all of your electronics.
Are 3rd Party Ramset Batteries Compatible to My Ramset Charger?
- tool-battery.com’s 3rd party power tool batteries were designed to work with your OEM Ramset battery charger. Most of our power tool batteries are made with the same Japanese battery cells used in OEM batteries with the highest industry standards. tool-battery.com’s batteries are designed to original manufacturer’s specifications, and will meet or exceed original Ramset batteries and not void manufacturer’s warranty.
My new battery isn't charging. Is it defective?
- Usually NO. New batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge the new battery two to four times to allow it to reach its maximum rated capacity.
It is generally recommend an overnight charge (approximately twelve hours). It is normal for a battery to become warm to the touch during charging and discharging.
When charging the battery for the first time, the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal with rechargeable batteries. New batteries are hard for the device to charge; they have never been fully charged and not “broken in.” Sometimes the device's charger will stop charging a new battery before it is fully charged. If this happens, remove the battery from the device and then reinsert it. The charge cycle should begin again. This may happen several times during the first battery charge. Don't worry; it's perfectly normal.
The Do’s and Don’ts of Battery Use
- Battery Do's:
Fully charge/discharge battery up to 4 cycles before achieving full capacity of a new battery
Fully discharge and then fully charge the battery every two to three weeks for battery conditions.
Run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual.
Remove from the device and stored in a cool, dry, clean place if the battery will not be in use for a month or longer,
Recharge the battery after a storage period
Ensure maximum performance of the battery by optimizing the device's power management features. Refer to the manual for further instructions.
Battery Don'ts:
Do not short-circuit. A short-circuit may cause severe damage to the battery.
Do not drop, hit or otherwise abuse the battery as this may result in the exposure of the cell contents, which are corrosive.
Do not expose the battery to moisture or rain.
Keep battery away from fire or other sources of extreme heat. Do not incinerate. Exposure of battery to extreme heat may result in an explosion.
Is it Possible to Upgrade the Device's Battery to a newer Chemistry?
- Maybe. NiCad, NiMH and Li-Ion are all fundamentally different from one another and cannot be substituted unless the device has been pre-configured from the factory to accept more than one type of battery chemistry.
Please refer to your manual to find out which rechargeable battery types the particular device supports or use our Battery Quick Finder Wizard to find all the compatible battery for your device. It will automatically list all of the battery types supported by the your specific device.
